ANSYS Products 17.0 Add-ons Multilingual 64-bit - Printable Version
+- MyDesignForum (http://mydesignforum.org)
+-- Forum: Design Software For PC (/Forum-Design-Software-For-PC)
+--- Forum: CAD/CAM/CAE Software (/Forum-CAD-CAM-CAE-Software)
+--- Thread: ANSYS Products 17.0 Add-ons Multilingual 64-bit (/Thread-ANSYS-Products-17-0-Add-ons-Multilingual-64-bit)
ANSYS Products 17.0 Add-ons Multilingual 64-bit - MyDesign - 10-26-2016 07:27 AM
ANSYS Products 17.0 Add-ons Multilingual 64-bit
Win | 610 MB
CADNEXUS - This package includes the CADNexus interface which allows Workbench applications to interface with CATIA V5 geometry in a bidirectional, associative manner.
ACISFORICEMCFD - The ANSYS software contained in this package provides the ACIS for ICEM CFD installation. ACIS will no longer be shipped as part of ICEM CFD but can be installed separately with this package.
APA - The ANSYS software contained in this package is for the ANSYS Piping Application. The ANSYS Piping Application (APA) is provided as an addin to ANSYS Workbench that allows you to perform pipe stress analysis according to US and European design codes. APA provides extended functionality to the DesignModeler and Mechanical applications.
COMPCURESIM - For composite parts, the determination of Process Induced Deformations & Curing Simulation is important as distorted parts complicate assembly process and may lead to premature failure of the final product. To avoid such cases, expensive iterative tooling may be required. To overcome these problems, compensation of tooling geometries can be computed using the sophisticated numerical analsis provided by ANSYS Composite Cure Simulation.
MECHASAS - The ANSYS software contained in this package is for the ANSYS Fatjack and ANSYS Beamcheck products. FATJACK (FATigue calculations for offshore JACKets) is the fatigue calculation module within the ASAS OFFSHORE suite of programs. FATJACK is used for the estimation for fatigue life for tubular and beam joints, employing deterministic or spectral methods.
- O.S.: Windows Server 2008-2012, Windows 7, Windows 8, Windows 8.1, Windows 10 (64-bit)
- Required Software: ANSYS Products 17
- CPU: Intel/AMD Dual Core or higher
- RAM: 2 GB of system memory
- Hard Drive: 5 GB of available space
- Optical Drive: DVD-ROM